DEMO: http://phpipamdemo.mihap.si/

List of bug fixes and new features:

	New features:
	-------------
	+ Massive add / edit / delete by specifying IP range (e.g. 10.10.0.1 - 10.10.0.254);
	+ Database upgrade / install from browser -> simplified installation/update procedure;
	+ New usertype viewer - can only view IP address list;
	+ Subnets can now be edited directly from IP address list;
	+ Option to lock subnet for writing to no-admin users;
	+ Device and Host list;
	+ Option to specify which subnet can have IP requests when editing / adding subnet if module is enabled;
	+ Latest version check on admin page;

	Bugfixes / enhancements:
	------------------------
	+ Fixed overspanning of multiple sections;
	+ Admin menu and add subnet now shown only to admins;
	+ Fixed VLAN table to show nesting and IP request option and statistics;
	+ Fixed subnet table to show nesting and IP request option;
	+ Subnet Adding shows only master subnets in section not in all sections;
	+ Tooltips and button hovers are now in separate javascript file;
	+ Graphs show only subnets with non-0 ip addresses;
	+ Various code enhancements + improved error handling;
	+ Fixed URL links not updating after few clicks;
	+ If loading slave subnet directly the subnet menu drops down and shows active slave subnet;
	+ Clicking on master shubnet shows all nested subnets and statistics;
	+ Redesigned log table;
	+ Fixed search;

For installation and updating just extract the package, edit config.php and open browser to run database installer / updater (or do it manually – read UPDATING).

You can download it on source forge site: phpipam-0.4.tar

Some screenshots of new stuff:

brm

DEMO: http://phpipamdemo.mihap.si/

List of bug fixes and new features:

	New features:
	-------------
	+ Subnet nesting - you can now have master subnet and normal subnets belonging to it;
	+ Server settings are now moved to database and can be set under admin menu;
	+ Request IP module on login page with email notification;
	+ Confirm/reject IP address request from admin page with mail notification;
	+ Admin dashboard notification of new requests;
	+ Autocomplete of owner and Switch name from all available when adding/editing IP address;
	+ New settings quick access on button hover;
	+ Option to export each subnet indivudually;

	Bugfixes / enhancements:
	------------------------
	+ jQuery update from 1.6 to 1.6.2;
	+ VLANs are now grouped by section;
	+ Direct access to subnet from vlan table;
	+ UI enhancements;
	+ Fixed user editing bug where user update broke password;
	+ Fixed password in new account notification;
	+ Fixed percentage display on Dashboard;
	+ IPv6 calculator /64 limit fixed;
	+ Changed tooltip effect to appear instantly for smoother display;
	+ Login functions are now separate file;

For upgrading please read UPGRADE file in package, basically it is done in standard unix way:

1. Backup database and existing files;
2. Extract package and edit settings in config.php;
3. Update database with importing UPDATE.sql file;

New installation stays the same as before…

You can download it on source forge site: phpipam-0.3.

Some screenshots:

Comments welcome.

Kind regards,
Miha

You can demo it on phpipamdemo.mihap.si.

Some screenshots:

Requirements:

    - Apache2 web server
    - Mysql server (5.1+)
    - PHP version 5.3+ with following modules
        + + mysqli              : Adds support for the improved mySQL libraries
        + + session             : Adds persistent session support
        + + gmp                 : Adds support for dev-libs/gmp (GNU MP library) -> to calculate IPv6 networks
    - PHP PEAR support (dev-php/pear)

Installation procedure is tipical linux – untar, create and populate mysql database, update config.php file. Read INSTALL file.

Description

phpipam is an open-source web IP address management application. Its goal is to provide light and simple |P address management application. It is ajax-based using jQuery libraries, it uses php scripts and javascript and some HTML5/CSS3 features, so some modern browser is preferred to be able to display javascript quickly and correctly...

Some features and tools:
- Section / Subnet separation
- IPv4/IPv6 support
- Displays free range and number of clients
- Subnet statistics
- User management
- E-Mail notification with IP details
- Import IP addresses from XLS / CSV file
- Export IP database to XLS file
- IPv4/IPv6 calculator
- Search IP database

What it does not do:
- Updates DNS server
- Scan subnet range (for now)

brm

App is ajax-based using jQuery libraries, it uses php scripts and javascript and some HTML5 features, so some modern browser is preferred to be able to display javascript quickly/correctly…

Some main features include:

• Section / Subnet separation
• IPv4/v6 support
• Displays free range and number of clients
• Subnet statistics
• User management
• E-Mail notification
• Import IP addresses from XLS / CSV file
• IPv4/v6 calculator
• Search IP database
• and many others.

If there will be interest I plan to launch it as an open source project. Next plans for v 0.2 are use of domain authentication, viewer-only user type, rss change feed, mass edit/delete/create, etc.

App can be tested on the following demo page:
ipamdemo

Some screenshots are below…

suggestions/comments are welcome
brm

Zanimivo pa je, da se ga kot kaze ne da izklopiti. Kaj vec pa bom vedel, ko bo na voljo jailbreak in terminal!

lpm

[mihapet@Hackint0sH ~] host -a www.v6.facebook.com
Trying "www.v6.facebook.com"
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15102
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;www.v6.facebook.com.		IN	ANY

;; ANSWER SECTION:
www.v6.facebook.com.	622	IN	AAAA	2620:0:1cfe:face:b00c::3

Received 65 bytes from 10.0.100.1#53 in 2 ms
[mihapet@Hackint0sH ~]

lpm

After few tries I managed to get it working, there is just a small, simple trick: IPv4 public address must be set to manually configured static IP address, it does not work with DHCP server, even if the IP address you get is always the same. And since there is no logging output to make troubleshooting figuring this out can be a problem…

After that it works great… IPv6 to the home!

lpm

Anyway, once we have IPv6 connectivity to internet we can also setup device to act as web server – since it is a Linux device this is not too hard to do. However, most mobile operators block the incoming TCP connection toward clients to prevent overcharging, so contact your ISP to verify if incoming connections are allowed. Here is the output from my ifconfig, that shows two active mobile data interfaces and sessions, one for IPv4 and second for IPv6:

gprs0     Link encap:UNSPEC  HWaddr *
          inet addr:10.10.9.14  P-t-P:10.10.9.14  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP  MTU:1400  Metric:1
          RX packets:1158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1294 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10
          RX bytes:162582 (158.7 KiB)  TX bytes:139618 (136.3 KiB)

gprs1     Link encap:UNSPEC  HWaddr *
          inet6 addr: 2a02:840:beef:30::2/0 Scope:Global
          UP POINTOPOINT RUNNING NOARP  MTU:1400  Metric:1
          RX packets:73 errors:0 dropped:0 overruns:0 frame:0
          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10
          RX bytes:8680 (8.4 KiB)  TX bytes:39414 (38.4 KiB)

For Apache to run we have to first install the Easy Debian package for N900, and after that the libapache2-mod-php package inside chrooted environment, which installs all required packages because of dependancies. Volia! We can verify that apache is listening on IPv6 interface by entering the following command:

[root@deb-m5v3d: /]netstat -tunlp | grep apache
tcp6     0    0    :::80    :::*      LISTEN   2009/apache2
[root@deb-m5v3d: /]

the :::80 means we are listening on all IPv6 interfaces on port 80. Here are some screenshots, just apache showing the basic php info:

Server localhost:

Client access to server:

All other apps should work also…

brm

http://mihap.si/#ipcalc

lpm

Same instalacije se nebi dotikal, kot vedno je odvisna od platforme… V kolikor nalagate binarne pakete bi morali imeti ipv6 podporo po defaultu omogoceno, v nasprotnem primeru ne pozabite sestaviti squida s podporo za ipv6.

Nastaviti moramo sledece:

• IPv6 nastavitev dostopovne tocke (APN) na telefonu ali
• Nastavitev brskalnika, da uporablja proxy streznik (google it!)
• IPv6 konfiguracija streznika

IPv6 APN nastavitev na telefonu

Tools -> settings -> Connection -> Access Points
Dodamo novo dostopovno tocko ipv6 – proti ipv4 se spremeni sledece:

• Access point name – to dobite pri vasem operaterju (v prihodnosti )
• Advanced settings – Network type: ipv6
• Advanced settings – Proxy ser.add: [2a02:xxx:xxx::1] – (ja, potrebujete oglate oklepaje)
• Advanced settings – Proxy port number: 8080

Konfiguracija squid streznika (squid.conf)

Izpostavil sem samo za IPv6 relevanten del konfiguracije, seveda predvidevam, da imate delujoco IPv6 mrezo:

# acl ipv6 networks
acl ipv6clients src 2a02:xxxx:xxxx::/48
# permit access to ipv6 clients
http_access allow ipv6clients
http_access deny all
# Squid listen ip/port
http_port [2a02:x:x::x]:8080

Clean & simple, to je to! Sedaj lahko zazenemo streznik:

/usr/local/squid/bin/squid -z	 (kreiramo dir za cache)
/usr/local/squid/bin/squid -NCd1  (za zacetek debug mode)

Se preverimo, ce poslusa na zeljenem portu (na linuxu je komanda netstat -tunlp | grep 8080):

[root@mihap ~]# sockstat | grep 8080
USER  COMMAND     PID   FD PROTO  LOCAL ADDRESS         FOREIGN ADDRESS
squid    squid        56306 13 tcp6   2a02:x:x::x:8080*:*
[root@mihap ~]#

in mogoce se pf inbound rule, v kolikor ga uporabljate:

myip6 = "2a02:x:x::x"
ipv6clients = "2a02:xxxx:xxxx::/48"
pass in quick on bce0 inet6 proto tcp from $ipv6clients to $myip6 port 8080
block in log all on bce0 inet6 from any to $myip6

Preverimo se lignjev log file:

2a02:x:x:x::x - - [06/Jan/2010:09:45:16 +0100] "GET http://ipv6.google.com/ HTTP/1.1" 200 1682 TCP_MISS:DIRECT

dela.

lpm